行业动态

当前位置:网站首页 >> 新闻资讯 >> 行业动态 >> 查看详情

行业动态

压缩空气精密过滤器种类有哪些?

来源:15vip太阳成  日期:2019-11-05 21:11:25  点击:2419  属于:行业动态
压缩空气精密过滤器种类有哪些?精密过滤器各级功能简介:Q级:第一道过滤。除主管道大粒水3U P级:第二道过滤,除水1US级:除油0.01U ,上面最好有P级保护,配套用。C级:是活性碳材料等级介绍:Q级-主管路过滤器多用于空压机后部冷却器之后或冷冻式干燥机及其他过滤器之前来保护整个系统。可滤除大量液体及3微米以上之固态颗粒,达到最低残留油份含量仅5PPMW/W。P级-空气管路过滤器多装置在工具、机械、马达、汽缸等设备及A级超高效除油过滤器前,或吸附式干燥机后以移除水分及粒子。可滤除小至1微米之液体及固态颗粒,达到最低残留油份含量仅0.5PPW/W。S级-超高效除油过滤器多用于吸附式干燥机上游或冷冻式干燥机下游以确保系统所使用空气处于完全无油状态。可滤除小到0.01微米液体及固体颗粒,达到最低残留油份含量仅仅只有0.001PPMW/W.切记一定要在上游加装P级空气管路过滤器来保护。
压缩空气精密过滤器种类有哪些?精密过滤器各级功能简介:Q级:第一道过滤。除主管道大粒水3U  P级:第二道过滤,除水1US级:除油0.01U ,上面最好有P级保护,配套用。C级:是活性碳材料等级介绍:Q级-主管路过滤器多用于空压机后部冷却器之后或冷冻式干燥机及其他过滤器之前来保护整个系统。可滤除大量液体及3微米以上之固态颗粒,达到最低残留油份含量仅5PPMW/W。P级-空气管路过滤器多装置在工具、机械、马达、汽缸等设备及A级超高效除油过滤器前,或吸附式干燥机后以移除水分及粒子。可滤除小至1微米之液体及固态颗粒,达到最低残留油份含量仅0.5PPW/W。S级-超高效除油过滤器多用于吸附式干燥机上游或冷冻式干燥机下游以确保系统所使用空气处于完全无油状态。可滤除小到0.01微米液体及固体颗粒,达到最低残留油份含量仅仅只有0.001PPMW/W.切记一定要在上游加装P级空气管路过滤器来保护。
What are the types of compressed air precision filters? Q: the first filter. In addition to the main pipe large grain water 3U P class: the second filter, in addition to water 1US class: in addition to oil 0.01U, above the best P class protection, supporting use. Grade C: activated carbon material grade Q - the main passing filter is mostly used to protect the whole system after the cooler at the back of the air compressor or before the freeze dryer and other filters. A large amount of liquid and solid particles over 3 microns can be filtered to reach the minimum residual oil content of only 5PPMW/W. P-class air line filters are usually installed before tools, machinery, motors, cylinders and a-class ultra-efficient oil removal filters, or after adsorption dryer to remove moisture and particles. It can filter liquid and solid particles as small as 1 micron to reach the minimum residual oil content of 0.5PPW/W. The s-class super efficient deoiling filter is mainly used upstream of adsorption dryer or downstream of freeze dryer to ensure that the air used in the system is completely oil-free. It can filter liquid and solid particles as small as 0.01 micron to achieve a minimum residual oil content of only 0.001PPMW/W. Be sure to install P grade air line filter upstream for protection.